Review of Tesla Invader 2/3

0
Want create site? Find Free WordPress Themes and plugins.

Overview

The Tesla Invader 2/3 is the latest product from Teslacigs Invader series and its battery scheme has been improved. You can switch the battery using the triple battery back to a dual battery back.

Design and Quality
You can use two or three batteries with the Tesla Invader 2/3 depending on how you want it. The maximum power outage also depends on how many batteries you are using, If you are using the dual battery back, you get a power output of 240W and 360W for triple battery back. The battery back that has three batteries has a trapezoidal shape. When you are using two batteries, there is no hump on it. There are no magnets in this device since it is held together by friction.

When removing the batteries with the triple battery back you have to place your fingertips on top of the back and push it for it to slide. It will then easily slide off and loosens the batteries. The back is firmly attached to the mod so there is no accidental sliding that will happen. When removing the batteries from a dual battery back, you have to give it a little more push since it may be more challenging because of the thin back. When it comes to charging the box mod, you have to use an extra charger because this does not come with a USB port.

The Tesla Invader 2/3 has a variable voltage mod design. There is no support for the temperature coils and the device does not come with a digital screen. The voltage also cannot be adjusted since there are n buttons to do so.

When setting up the voltage of the Tesla Invader 2/3 you need to use the potentiometer. This can be seen at the bottom front of the device. This device is detonated with 3 to 8 volts and has ¼ markings on the dial in between each number. The potentiometer does not have any detents which do not show the settings for the device. The potentiometer, however, is easy to use since you just have to operate it using your fingertips. You do not have to change the voltage setting inadvertently since it has enough resistance. The device’s wattage is set up based on the coils used.

You will see a LED light at the bottom part of the device’s body. The usage of the device can be checked through the LED light which is really great. The fire button can be seen at the upper part on the front side of the device. This location is really convenient and makes it easy to use.

Specifications

The device has two different sizes. When using the triple battery back its size is 50mm by 42mm by 85mm. On the other hand, when using the dual battery back the device’s size is 35mm by 42mm by 85mm. The Tesla Invader 2/3 is powered by an 18650 battery and have a maximum power output of 240W when using the dual battery back and 360W when the triple battery back is used.  You are sure that the mod is secure because it has several protection features. The box mod comes with an over puffing and reverse connection protection. You also have an atomizer short circuit protection, low voltage alert, overheating and over-current protection. 

What’s in the Box

Once you purchase your own Tesla Invader 2/3 you will surely get the box mod in the package. There are no batteries included so you have to purchase those separately. An additional battery cover is in the box. It also comes with a warning card and the user manual.

Conclusion

When you get the Tesla Invader 2/3 you are sure that you have the best mod. There may be other mods that are similar to this device available on the market today but this product from the Teslacigs Invader series is one of the best. The battery scheme is really impressive since you get to choose if you want to use three or two batteries when you vape. The device is really affordable since it is sold at only $38.99. You definitely get the best value for your money. The device can be purchased at http://www.urvapin.com/.

Did you find apk for android? You can find new Free Android Games and apps.

You might also like More from author

Leave A Reply

Your email address will not be published.